Emerson PACSystems SLM042 - Backup and Restore Configuration

PACSystems Ethernet Switch SLM042 User Manual Section 5
GFK-3123A Jan 2020
Web Management 18
5.2.4 LLDP
LLDP (Link Layer Discovery Protocol) function allows the switch to advertise its information to
other nodes on the network and store the information it discovers.
Figure 11: LLDP
The following table describes the labels in this screen.
Label
Description
LLDP Protocol
“Enable” or “Disable” LLDP function.
LLDP Interval
The interval of resend LLDP (by default at 30 seconds)
Apply
Click “Apply” to activate the configurations.
Help
Show help file.
5.2.5 Backup & Restore
You can save current EEPROM value of the switch to TFTP server, then go to the TFTP restore
configuration page to restore the EEPROM value.