PACSystems Ethernet Switch SLM042 User Manual Section 5
GFK-3123A Jan 2020
Web Management 32
The following table describes the labels in this screen
Configure SNMP v3 context table. Assign the context name of context
table. Click "Apply" to change context name
Configure SNMP v3 user table.
User ID: set up the user name.
Authentication Password: set up the authentication password.
Privacy Password: set up the private password.
Click "Add" to add context name.
Click "Remove" to remove unwanted context name.
Configure SNMP v3 group table.
Security Name (User ID): assign the user name that you have set up in
user table.
Group Name: set up the group name.
Click "Add" to add context name.
To Next Page
Loading...
