6. Close the housing cover and tighten to safety specification. Always
ensure a proper seal so the metal touches metal, but do not over
tighten.
7. Position antenna vertically, either straight up or straight down. The
antenna should be approximately 3 ft. (0.91 m) from any large
structures or buildings, to allow clear communication to other
devices.
A. 2-in. U-bolt for pipe fitting
3.3
Remote antenna (optional)
The high gain, remote antenna options provide flexibility for mounting the
device based on wireless connectivity, lightning protection, and current
work practices.
Quick Start Guide April 2021
10 Emerson.com/Rosemount
To Next Page
Loading...
