Emerson Rosemount 702 - 2.4 Field Communicator connections

Note
The conduit entries are threaded ½–14 NPT.
Figure 2-2: Conduit Entry
AA
A. Conduit entry
2.4 Field Communicator connections
The power module needs to be installed before the Field Communicator can
interface with the Rosemount 702 Wireless transmitter. For HART
®
Wireless
Transmitter communication via a Field Communicator, a Rosemount 702
Wireless Device Dashboard (DD) is required. To obtain the latest DD, visit
the Field Communicator System Software and Device Description site at:
Emerson.com/Field-Communicator. This transmitter uses the Black Power
Module; Order model number 701PBKKF.
April 2021 Quick Start Guide
Quick Start Guide 5