Figure 5-1: Wireless Gateway Explorer Page
5.4 AMS Wireless Configurator
When the device has joined the network, it will appear in AMS Wireless
Configurator as illustrated below.
Figure 5-2: AMS Wireless Configurator, Device Explorer Screen
5.5 Troubleshooting
If the device is not joined to the network after power up, verify the correct
configuration of the Network ID and Join Key, and that Active Advertising
has been enabled on the Wireless Gateway. The Network ID and Join Key in
the device must match the Network ID and Join Key of the Gateway.
April 2021 Quick Start Guide
Quick Start Guide 17
To Next Page
Loading...
