Emerson Rosemount 702 - 5.2 Field Communicator; 5.3 Wireless Gateway

Searching for
network
Joining network Connected with
limited bandwidth
Connected
N E T w K
S R C H N G
n e t w k
N E G O T
n e t w k
L I M - O P
n e t w k
O K
5.2 Field Communicator
For HART
®
Wireless transmitter communication, a Rosemount 702
Transmitter DD is required.To obtain the latest DD, visit the Emerson Easy
Upgrade site at: Emerson.com/Device-Install-Kits.
Function Key sequence Menu items
Communications 3, 3 Join Status, Wireless
Mode, Join Mode, Number
of Available Neighbors,
Number of
Advertisements Heard,
Number of Join Attempts
5.3 Wireless Gateway
Procedure
In the Gateway’s integrated web server, navigate to the user interface page.
This page shows whether the device has joined the network and is
communicating properly. Refer to Emerson Wireless Gateway Reference
Manual.
Note
It may take several minutes for the device to join the network.
Note
If the device joins the network and immediately has an alarm present, it is
likely caused by the sensor configuration. Check the sensor wiring (see
Figure 6-1) and the sensor configuration (see Table 6-7).
Quick Start Guide April 2021
16 Emerson.com/Rosemount