Endress+Hauser analytikjena SPECORD PLUS - Accessories; Standard Cell Holder Installation

SPECORD PLUS Operation
27
Figure15Example of a spectral scan
6.4 Accessories
Accessories are detected automatically during initialization of the SPECORD PLUS and
are taken into account in the method parameters. The accessories must be installed be-
fore switching on the SPECORD PLUS for this reason.
Observe the information on assembly, adjustment and function of the accessories in the
"SPECORD PLUS accessories" operating manual.
6.4.1 Cell holders for standard cells
Design
The standard delivery scope of the SPECORD PLUS includes cell holders already installed
in the device. The double-beam devices are delivered with two cell holders, the
SPECORD 50 PLUS with one cell holder. The cell holders are designed for standard cells
with a layer thickness of 50mm and a width of 12.5mm.
The cells are irradiated at a height of approx. 5 to 15mm above the support level of the
cell holder.