Endress+Hauser Cerabar M - Page 167

Cerabar M, Deltabar M, Deltapilot M Commissioning with the FF configuration program
Endress+Hauser 167
Test Read Write/
TEST_RW
Display
Index: 8
Data type: DS-85
Access: wr for Auto,
OOS
This parameter is required only for the FF conformance test and has no meaning in
normal operation.
DD Resource/
DD_RESOURCE
Display
Index: 9
Data type: visible string
Access: read only
String that indicates the tag of the resource that contains the device description for
this resource.
Manufacturer ID/
MANUFAC_ID
Display
Index: 10
Data type: unsigned32
Access: read only
Displays the manufacturer's ID number.
Endress+Hauser: 0 x 452B48 (decimal: 4533064)
Device Type/DEV_TYPE
Display
Index: 11
Data type: unsigned16
Access: read only
Displays the device ID number.
Deltabar M 5x: hexadecimal: 0x1021, decimal: 4129.
Cerabar M 5x: hexadecimal: 0x1019, decimal: 4121.
Deltapilot M 5x: hexadecimal: 0x1023, decimal: 4131.
Device Revision/
DEV_REV
Display
Index: 12
Data type: unsigned8
Access: read only
Displays the revision number of the device.
DD Revision/DD_REV
Display
Index: 13
Data type: unsigned8
Access: read only
Displays the revision number of the device description (DD).
Grant Deny/
GRANT_DENY
Entry
Index: 14
Data type: DS-70
Access: wr for Auto,
OOS
Grant or restrict access authorization for a fieldbus host system to the device. This
parameter is not evaluated by Deltabar M 5x, Cerabar M 5x and Deltapilot M 5x.
Hard Types/
HARD_TYPES
Display
Index: 15
Data type: bit string
Access: read only
Displays the input and output signal type.
Resource Block - standard parameters
Parameter Description