Endress+Hauser Cerabar M - Page 174

Commissioning with the FF configuration program Cerabar M, Deltabar M, Deltapilot M
174 Endress+Hauser
Compat. level/
COMPATIBILITY_LEVE
L
Display
Index: 51
Data type: unsigned8
Access: read only
Indicates up to which specific device version the devices are compatible.
Factory setting:
1
ENP version/
FF_E_N_P_VERSION
Display
Index: 52
Data type: visible string
Access: read only
This parameter indicates the version of the standard for electronic nameplates
supported by the device.
Factory setting:
2.02.00
Pd-tag/FF_PD_TAG
Display
Index: 53
Data type: visible string
Access: read only
The device tag currently configured via the display.
Serial number/
DEVICE_SERIAL_NUM
BER
Display
Index: 54
Data type: visible string
Access: read only
Displays the serial number of the device (11 alphanumeric characters).
Order code part 1/
E_N_P_ORDER_CODE_
1
Display
Index: 55
Data type: visible string
Access: read only
Displays the extended order code (part 1).
Order code part 2/
E_N_P_ORDER_CODE_
2
Display
Index: 56
Data type: visible string
Access: read only
Displays the extended order code (part 2).
Order code/
DEVICE_ORDER_IDENT
Display
Index: 57
Data type: visible string
Access: read only
Displays the order number.
Firmware version/
FF_SOFTWARE_REVISI
ON
Display
Index: 58
Data type: visible string
Access: read only
Displays the firmware version.
Resource Block - Endress+Hauser parameters
Parameter Description