Endress+Hauser Deltabar S FMD 77 - Page 38

Deltabar S
38 Endress+Hauser
Threaded connection ISO 228 G 1/2 B and ANSI 1/2" NPT (internal), separator with PTFE seal
P01-FMD78xxx-06-09-xx-xx-012
Process connection FMD 78, left: with threaded connection ISO 228 G 1/2 B, right: with threaded connection ANSI 1/2"
NPT (internal)
1 PTFE seal as standard
Tri-Clamp ISO 2852
P01-FMD78xxx-06-09-xx-xx-005
Process connection FMD 78, Material: AISI 316L, surface roughness of the wetted surfaces ≤ 30 µ in as standard. Lower
surface roughness on request.
0.24”
(6)
3.54”
(90)
3.54”
(90)
G½
3.94”
(100)
3.94”
(100)
SW22
22 AF
1/2” NPT
1.26”
(32)
SW 27
27 AF
1
1
Version Material Nominal pressure T
K
Process Weight of two
diaphragm seals
[mbar/10 K] lbs [kg]
GA (G 1/2B) AISI 316L 600 psi [PN 40] +0.1 6.4 [2.9]
RL (1/2" NPT) AISI 316L 600 psi [PN 40] +0.1 6.4 [2.9]
d
M
C
7
1.18”
(30)
Version Nominal diameter
ISO 2852
Nominal diameter Diameter Diaphragm
diameter
T
K
Process Weight of two
diaphragm seals
C
7
d
M
in [mm] in [mm] [mbar/10 K] lbs [kg]
TC DN 25 – 38 1" – 1-1/2" 2.00 [50.5] 1.34 [34] +5.44 4 [2.0]
TD DN 40 – 51 2" 2.50 [64] 1.77 [45] +1.91 5 [2.2]
TF DN 70 – 76.1 3" 3.58 [91] 2.81 [71.5] +0.08 5.3 [2.4]