Endress+Hauser Deltabar S FMD 77 - Process Connections PMD 75

Deltabar S
28 Endress+Hauser
Device height H
Process connections PMD 75
(with metallic measuring)
Oval flange, connection 1/4"-18 NPT or RC 1/4
P01-PMD75xxx-06-09-xx-xx-005
Process connection PMD 75,
above: 4 inH
2
O (10 mbar) and 12 inH
2
O (30 mbar) measuring cell
below: Measuring cell ≥ 40 inH
2
O (100 mbar)
H Device height → see page 30, section "Device height H"
Description Device height H
Housing, optional display on the side 9.96" (253 mm)
Housing, optional display on the top, flat cover 10.2" (259 mm)
Housing, optional display on the top, high cover 10.6" (270 mm)
H
7/16”-20 UNF
RC1/4
1/4”-18 NPT
+
–
3.94”
(100)
2.83”
(72)
3.86”
(98)
M10 (M12)
3.43”
(87)
4.17”
(106)
M10
1.63”
(41.3)
1.63”
(41.3)
+
–
3.35”
(85)
H
2.13”
(54)
2.13”
(54)
3.35”
(85)
3.94”
(100)
7/16”-20 UNF
RC1/4
1/4”-18 NPT
Ver-
sion
Connection Mounting Material Accessories Weight
1
1) Process connection weight, for housing weight see page 44
B 1/4"-18 NPT IEC 61518 7/16"-20 UNF Steel C 22.8 2 vent valves (AISI 316L)
included
6.8 lb (3.1 kg)
D 1/4"-18 NPT IEC 61518 7/16"-20 UNF AISI 316L 6.8 lb (3.1 kg)
F 1/4"-18 NPT IEC 61518 7/16"-20 UNF Alloy C Vent valves, see page 57,
feature 110 "Additional
options 2".
7.3 lb (3.3 kg)
U RC 1/4 7/16"-20 UNF AISI 316L 2 vent valves (AISI 316L)
included
6.8 lb (3.1 kg)
1 1/4"-18 NPT IEC 61518 – PN 160: M10
– PN 420: M12
Steel C 22.8 6.8 lb (3.1 kg)
2 1/4"-18 NPT IEC 61518 – PN 160: M10
– PN 420: M12
AISI 316L 6.8 lb (3.1 kg)
3 1/4"-18 NPT IEC 61518 – PN 160: M10
– PN 420: M12
Alloy C Vent valves, see page 57,
feature 110 "Additional
options 2".
7.3 lb (3.3 kg)