Endress+Hauser Deltabar S FMD 77 - Weight; Material

Deltabar S
44 Endress+Hauser
Weight Housing
Process connections
→ See corresponding process connection, page 26 ff.
Material
• Housing:
– Optional display, side-mount (T14), selectable:
– Die-cast aluminum with protective polyester-based powder-coating: RAL 5012 (blue), cover: RAL 7035
(grey)
– Stainless steel AISI 316L (1.4435)
– Optional display, top-mount (T15):
– Die-cast aluminum with protective polyester-based powder-coating: RAL 5012 (blue), cover: RAL 7035
(grey)
• Measuring cell PMD 70/FMD 76, filling cell
– 10 inH
2
O (25 mbar) and 40 inH
2
O (100 mbar) measuring cell: Silicone oil
– 200 inH
2
O (500 mbar) and 1200 inH
2
O (3000 mbar) measuring cell: Mineral oil
– for oxygen and ultra pure gas applications: Voltalef
• Process diaphragm PMD 70/FMD 76: Al
2
O
3
(Aluminum oxide ceramic)
• O-ring for cover sealing: NBR
•
Nameplates: AISI 304 (1.4301)
• Mounting accessories: Mounting kit with screws AISI 304 (1.4301)
• Capillary: AISI 316 Ti (1.4571)
• Protective armor for capillary: AISI 304 (1.4301)
→ For process connections, process diaphragms, seals and filling oils see ordering information, page 53 ff.
Optional display module, side-mount (T14) Optional display module,
top-mount (T15)
Aluminum AISI 316L Aluminum
With display including
electronic insert
2.6 lb (1.2 kg) 4.6 lb (2.1 kg) 4 lb (1.8 kg)
Without display including
electronic insert
2.4 lb (1.1 kg) 4.4 lb (2.0 kg) 3.7 lb (1.7 kg)