Deltabar S
Endress+Hauser 67
Further documentation
Technical Information • Cerabar S: TI 383P/24/ae
• EMC test basic principles: TI 241F/00/en
Operating instructions
• Deltabar S (HART): BA 270P/00/en
Safety Instructions 4 to 20 mA HART:
• ATEX II 1/2 G EEx ia IIC T6: XA 235P/00/a3
• ATEX II 1/2 D, PMD 70, PMD 75, FMD 77 and FMD 78: XA 237P/00/a3
• ATEX II 1/2 D EEx ia IIC T6, FMD 76: XA 238P/00/a3
• ATEX II 1/3 D, PMD 70, PMD 75, FMD 77 and FMD 78: XA 239P/00/a3
• ATEX II 2 G EEx d IIC T6, PMD 75, FMD 77 and FMD 78: XA 240P/00/a3
• ATEX II 3 G EEx nA II T6: XA 241P/00/a3
• ATEX II 1/2 GD EEx ia IIC T6: XA 243P/00/a3
• ATEX II 1 GD EEx ia IIC T6: XA 236P/00/a3
PROFIBUS-PA, Foundation Fieldbus:
• ATEX II 1/2 G EEx ia IIC T6: XA 278P/00/a3
• ATEX II 1/2 D, PMD 70, PMD 75, FMD 77 and FMD 78: XA 280P/00/a3
• ATEX II 1/2 D EEx ia IIC T6, FMD 76: XA 281P/00/a3
• ATEX II 1/3 D, PMD 70, PMD 75, FMD 77 and FMD 78: XA 282P/00/a3
• ATEX II 2 G EEx d IIC T6, PMD 75, FMD 77 and FMD 78: XA 283P/00/a3
• ATEX II 3 G EEx nA II T6: XA 284P/00/a3
• ATEX II 1/2 GD EEx ia IIC T6: XA 285P/00/a3
• ATEX II 1 GD EEx ia IIC T6: XA 286P/00/a3
Installation/
Control Drawings
4 to 20 mA HART:
• FM IS Class I, II, III Div. 1, Groups A – G; NI, Class I Div. 2, Groups A – D; AEx ia:
ZD 141P/00/en
• CSA IS Class I, II, III, Div. 1, Groups A – G; Class I Div. 2, Groups A – D: ZD 142P/00/en
PROFIBUS-PA:
• FM IS Class I, II, III Div. 1 Groups A – G; NI, Class I Div. 2, Groups A – D; AEx ia:
ZD 143P/00/en
• CSA IS Class I, II, III, Div. 1, Groups A – G; Class I Div. 2, Groups A – D: ZD 144P/00/en
Foundation Fieldbus:
• FM IS Class I, II, III Div. 1, Groups A – G; NI, Class I Div. 2, Groups A – D; AEx ia:
ZD 145P/00/en
• CSA IS Class I, II, III, Div. 1, Groups A – G; Class I Div. 2, Groups A – D: ZD 146P/00/en
Overspill protection
• Overspill protection WHG: ZE 259P/00/de
To Next Page
Loading...
