Deltabar S
Endress+Hauser 57
PMD 75 (continued)
100 Additional options 1
A Additional options 1 not selected
B Material test certificate for wetted components, inspection certificate as per EN
10204 3.1.B acc. to specification 52005759
C NACE MR0175 material
D Material test certificate for wetted components as per EN 10204 3.1.B and
NACE MR0175 material, inspection certificate as per EN 10204 acc. to
specification 52010806
M Overvoltage protection
NHistoROM module
S GL (German Lloyd) marine certificate
V Mounting on shut-off valve from above
W Mounting on shut-off valve from below
2 Test report acc. to EN10204 2.2
3 Routine test with certificate, inspection certificate as per EN
10204 3.1.B
4 Overpressure test with certificate,
inspection certificate as per EN 10204 3.1.B
110 Additional options 2
A Additional options 2 not selected
K Vent valves (2 pieces), Alloy C
L Vent valves (4 pieces), Alloy C
M Overvoltage protection
NHistoROM module
R Screws 7/16 UNF, length 1 1/2" (4 pieces)
S GL (German Lloyd) marine certificate
U Mounting bracket for wall and pipe, AISI 316L
2 Test report acc. to EN10204 2.2
3 Routine test with certificate, inspection certificate as per EN
10204 3.1.B
4 Overpressure test with certificate,
inspection certificate as per EN 10204 3.1.B
5 Helium leak test EN 1518 with test certificate, inspection certificate as per
EN 10204 3.1.B
PMD 75 complete order code
To Next Page
Loading...
