Endress+Hauser Deltabar S FMD 77 - Page 29

Deltabar S
Endress+Hauser 29
Oval flange, connection 1/4"-18 NPT or RC 1/4, with side vent
P01-PMD75xxx-06-09-xx-xx-004
Process connection PMD 75, 4 inH
2
O (10 mbar) and 12 inH
2
O (30 mbar) measuring cell
P01-PMD75xxx-06-09-xx-xx-003
Process connection PMD 75, nominal value ≥ 40 inH
2
O (100 mbar)
H Device height → see page 30, section "Device height H"
4.17”
(106)
1.63”
(41.3)
+
–
3.35”
(85)
1.65”
(42)
H
2.13”
(54)
3.35”
(85)
3.94”
(100)
7/16”-20 UNF
RC1/4
1/4”-18 NPT
1/4”-18 NPT
RC1/4
H
7/16”-20 UNF
RC1/4
RC1/4
1/4”-18 NPT
1/4”-18 NPT
+
–
3.94”
(100)
2.83”
(72)
3.86”
(98)
1.63”
(41.3)
1.10”
(28)
2.13”
(54)
3.43”
(87)
Ver-
sion
Connection Mounting Material Accessories Weight
1
1) Process connection weight, for housing weight see page 44
C 1/4"-18 NPT IEC 61518 7/16"-20 UNF Steel C 22.8 4 locking screws (AISI 316L)
included
9.3 lb (4.2 kg)
E 1/4"-18 NPT IEC 61518 7/16"-20 UNF AISI 316L 9.3 lb (4.2 kg)
H 1/4"-18 NPT IEC 61518 7/16"-20 UNF Alloy C Vent valves, see page 57,
feature 110 "Additional
options 2".
9.3 lb (4.2 kg)
V RC 1/4 7/16"-20 UNF AISI 316L 4 looking screws (AISI 316L)
included
9.3 lb (4.2 kg)