Endress+Hauser Deltabar S FMD 77 - Page 48

Deltabar S
48 Endress+Hauser
P01-FMD78xxx-05-xx-xx-xx-002
Type Diaphragm seal version
1 J4 ANSI flange 3" 150 lb RF, AISI 316L, Extensions: 2"/4"/6"/8"
VH Cell 3" 150-2500 lb, AISI 316L
AG ANSI flange 3" 150 lb RF, AISI 316/316L
AS ANSI flange 3" 300 lb RF, AISI 316/316L
TF Tri-Clamp, ISO 2852 DN 70 – DN 76.1 (3"), AISI 316L
2 GA Thread ISO 228 G 1/2 B, PN 40, AISI 316L, Separator, PTFE seal
RL Thread ANSI 1/2" FNPT, PN 40, AISI 316L, Separator, PTFE seal
UH Cell DN 80 PN 16-400, AISI 316L
UJ Cell DN 100 PN 16-400, AISI 316L
VJ Cell 4" 150-2500 lb, AISI 316L
B5 EN/DIN flange DN 80 PN 10-40 B1, AISI 316L
BT EN/DIN flange DN 100 PN 10/16 A, AISI 316L
B6 EN/DIN flange DN 100 PN 25/40 B1, AISI 316L
AH ANSI flange 4" 150 lb RF, AISI 316/316L
J5 ANSI flange 4" 150 lb RF, AISI 316/316L, Extensions: 2"/4"/6"/8"
AT ANSI flange 4" 300 lb RF, AISI 316/316L
MT DIN 11851 DN 80 PN 25, AISI 316L
M5 DIN 11851 DN 80 PN 25 socket, AISI 316L
3 MS DIN 11851 DN 65 PN 25, AISI 316L
M4 DIN 11851 DN 65 PN 25 socket, AISI 316L
4 SC RDM Tri-Clamp, ISO 2852 DN 38 (1-1/2"), AISI 316L
5 UF Cell DN 50 PN 16-400, AISI 316L
VF Cell 2" 150-2500 lb, AISI 316L
B3 EN/DIN flange DN 50 PN 10-40 B1, AISI 316L
AF ANSI flange 2" 150 lb RF, AISI 316/316L
AR ANSI flange 2" 300 lb RF, AISI 316/316L
MR DIN 11851 DN 50 PN 25, AISI 316L
M3 DIN 11851 DN 50 PN 25 socket, AISI 316L
6 SD RDM Tri-Clamp, ISO 2852 DN 51 (2"), AISI 316L
7 TD Tri-Clamp, ISO 2852 DN 40 – DN 51 (2")/DN 50, AISI 316L
8 TK DRD 65 mm, PN 25, AISI 316L
TR Varivent Type N for tubes DN 40 – DN 162, PN 40, AISI 316L
Type Diaphragm seal version
9 SB RDM Tri-Clamp, ISO 2852 DN 25 (1"), AISI 316L
10 WH Sanitary tank spud, AISI 316L, Extensions 2"
11 TC Tri-Clamp, ISO 2852 DN 25 – DN 38 (1", 1-1/2"), AISI 316L
0
5
10
15
20
25
30
35
40
45
012345678910
11
10
9
T Ambient
K
[mbar/10 K]
[m]
Capillary length