Deltabar S
Endress+Hauser 59
FMD 76 (continued)
→ For continuation of FMD 76 ordering information, see the following page.
70 Process connection low-pressure side, material, seal
Mounting: 7/16 – 20 UNF
B 1/4" – 18 NPT IEC 61518, C22.8, FKM Viton
D 1/4" – 18 NPT IEC 61518, AISI 316L, FKM Viton
F 1/4" – 18 NPT IEC 61518, Alloy C, FKM Viton
G 1/4" – 18 NPT IEC 61518, PVDF, FKM Viton,
Safety instructions (XA), observe electrostatic charge.
K 1/4" – 18 NPT IEC 61518, AISI 316L, EPDM
L 1/4" – 18 NPT IEC 61518, Alloy C, EPDM
M 1/4" – 18 NPT IEC 61518, AISI 316L, Kalrez
N 1/4" – 18 NPT IEC 61518, Alloy C, Kalrez
P 1/4" – 18 NPT IEC 61518, AISI 316L, Chemraz
Q 1/4" – 18 NPT IEC 61518, Alloy C, Chemraz
S 1/4" – 18 NPT IEC 61518, AISI 316L, FKM Viton, degreased
T 1/4" – 18 NPT IEC 61518, AISI 316L, FKM Viton, cleaned for oxygen service
U RC 1/4, AISI 316L, FKM Viton
80 Process connection high-pressure side, material
EN/DIN flange
B DN 80 PN 25/40 A, AISI 316L
D DN 80 PN 10-40, AISI 316L with ECTFE coating, Safety instructions (XA), observe
electrostatic charge!
E DN 80 PN 10-40 A, Alloy C276
F DN 100 PN 10/16 A, AISI 316L
G DN 100 PN 25-40 A, AISI 316L
H DN 100 PN 25-40, AISI 316L with ECTFE coating, Safety instructions (XA), observe
electrostatic charge!
J DN 100 PN 25-40 A, Alloy C276
L DN 100 PN 10-16, AISI 316L with ECTFE coating, Safety instructions (XA), observe
electrostatic charge!
M DN 100 PN 10-16 A, Alloy C276
ANSI flange
P 3" 150 lb RF, AISI 316/316L
R 3" 150 lb, AISI 316/316L with ECTFE coating, Safety instructions (XA), observe
electrostatic charge!
S 3" 150 lb RF, Alloy C276
T 4" 150 lb RF, AISI 316/316L
U 4" 150 lb, AISI 316/316L with ECTFE coating, Safety instructions (XA), observe
electrostatic charge!
V 4" 150 lb RF, Alloy C276
W 4" 300 lb RF, AISI 316/316L
JIS flange
1 10K 80A RF, AISI 316L
3 10K 80A RF, Alloy C276
4 10K 100A RF, AISI 316L
Hygienic connection
5 Sanitary tank spud, AISI 316L, extended diaphragm seal 2"
100 Additional options 1
A Additional options 1 not selected
B Material test certificate for wetted components, inspection certificate as per EN
10204 3.1.B acc. to specification 52005759
M Overvoltage protection
N HistoROM module
S GL (German Lloyd) marine certificate
2 Test report acc. to EN10204 2.2
3 Routine test with certificate, inspection certificate as per EN
10204 3.1.B
4 Overpressure test with certificate,
inspection certificate as per EN 10204 3.1.B
FMD 76 complete order code
To Next Page
Loading...
