Endress+Hauser Deltabar S FMD 77 - Page 65

Deltabar S
Endress+Hauser 65
FMD 78 (continued)
→ For continuation of FMD 78 ordering information, see the following page.
50 Calibration, units
1 Calibration: nominal range, mbar/bar
2 Calibration: nominal range, kPa/MPa
3 Calibration: nominal range, mmH
2
O/mH
2
O
4 Calibration: nominal range, in H
2
O/ftH
2
O
6 Calibration: nominal range, psi
B Custom calibration: see additional specification
C Factory calibration: see additional specification, Factory calibration certificate, 5-point
D DKD calibration: see additional specification, DKD-Certificate
60 Material diaphragm
1 AISI 316L
2Alloy C
3Monel
5Tantalum
6 AISI 316L with Rhodium-Gold coating
7 AISI 316L with 0.09 mm PTFE foil (not for vacuum applications)
80 Process connection, material
Membrane diaphragm seal cell structure
UF Cell DN 50 PN 16-400, AISI 316L
UH Cell DN 80 PN 16-400, AISI 316L
UJ Cell DN 100 PN 16-400, AISI 316L
VF Cell 2" 150-2500 lb, AISI 316L
VH Cell 3" 150-2500 lb, AISI 316L
VJ Cell 4" 150-2500 lb, AISI 316L
Threaded connection
GA Thread ISO 228 G 1/2 B, PN 40, AISI 316L, separator, PTFE seal
RL Thread ANSI 1/2" FNPT, PN 40, AISI 316L, separator, PTFE seal
Tri-Clamp connection
TC ISO 2852 DN 25 – DN 38 (1", 1-1/2"), AISI 316L
TD ISO 2852 DN 40 – DN 51 (2")/DN 50, AISI 316L
TF ISO 2852 DN 70 – DN 76.1 (3"), AISI 316L
Pipe diaphragm seal Tri-Clamp
SB ISO 2852 DN 25 (1"), AISI 316L
SC ISO 2852 DN 38 (1 1/2"), AISI 316L, 3.1.B + Pressure test acc. to PED Cat.II
SD ISO 2852 DN 51 (2"), AISI 316L, 3.1.B + Pressure test acc. to PED Cat. II
Hygienic connections
TR Varivent model N for pipes DN 40 – DN 162, PN 40, AISI 316L
TK DRD 65 mm, PN 25, AISI 316L
WH Sanitary tank spud, AISI 316L, extended diaphragm seal 2"
MR DIN 11851 DN 50 PN 25, AISI 316L
MS DIN 11851 DN 65 PN 25, AISI 316L
MT DIN 11851 DN 80 PN 25, AISI 316L
M3 DIN 11851 DN 50 PN 25 socket, AISI 316L
M4 DIN 11851 DN 65 PN 25 socket, AISI 316L
M5 DIN 11851 DN 80 PN 25 socket, AISI 316L
EN/DIN flange
B3 DN 50 PN 10-40 B1, AISI 316L
B5 DN 80 PN 10-40 B1, AISI 316L
BT DN 100 PN 10/16 A, AISI 316L
B6 DN 100 PN 25/40 B1, AISI 316L
ANSI flange
AF 2" 150 lb RF, AISI 316/316L
AR 2" 300 lb RF, AISI 316/316L
AG 3" 150 lb RF, AISI 316/16L
AS 3" 300 lb RF, AISI 316/316L
J4 3" 150 lb RF, AISI 316/316L, extended diaphragm seal: 2"/4"/6"/8",
extended diaphragm seal: see additional specification
AH 4" 150 lb RF, AISI 316/316L
AT 4" 300 lb RF, AISI 316/316L
J5 4" 150 lb RF, AISI 316/316L, extended diaphragm seal: 2"/4"/6"/8",
extended diaphragm seal: see additional specification
FMD 78 complete order code