Endress+Hauser Deltabar S PMD75 - Page 48

Parameter description (FF configuration program) Cerabar S/Deltabar S/Deltapilot S FOUNDATION Fieldbus
48 Endress+Hauser
Mat. Proc. Conn. +/
MAT_PROC_CONN_PO
S
Selection
Index: 48
Data type: float
Access: auto, OOS
For selecting and displaying the material of the process connection (P+).
→ See also parameter description for Mat. Proc. Conn. –/MAT_PROC_CONN_NEG
Options:
•Not used
•Unknown
•Special
• Steel
• 304 st. steel
• 316 st. steel
• Alloy C
•Monel
•Tantalum
• Titanium
•PTFE (Teflon)
• 316L st. steel
•PVC
•Inconel
•PVDF
•ECTFE
Factory setting:
As per order specifications
Mat. Proc. Conn. –/
MAT_PROC_CONN_
NEG
Selection
Index: 49
Data type: float
Access: auto, OOS
For selecting and displaying the material of the process connection (P–).
→ See also parameter description for Mat. Proc. Conn. +/MAT_PROC_CONN_POS
Seal Type/SEAL_TYPE
Selection
Index: 50
Data type: visible string
Access: auto, OOS
For selecting and displaying the material of the process seal.
Options:
•Not used
•Unknown
•Special
• FKM Viton
•NBR
•EPDM
•Urethane
•IIR
•Kalrez
• FKM Viton oxyg
•CR
•MVQ
•PTFE glass
•PTFE graphite
• PTFE oxygen
• Copper
• Copper f. oxygen
Factory setting:
As per order specifications
Up Down Feature
Supported/UP_DOWN_
FEATURE_SUPPORTED
Index: 51
Data type:UNSIGNED8
Access:
No function. Reserved for future use.
Resource Block
Parameter Description