3 Installation Temperature head transmitter
36 Endress+Hauser
CE-marks, conformity description
The unit has been manufactured using up-to-date production equipment and has left
our works in perfect and safe condition. It complies with the safety requirements to
EN 61 010.
The unit described in these instructions therefore fulfils the legal requirements set by the
EU guidelines. The manufacturer confirms a positive completion of all tests by fitting the
unit with a CE mark.
2.2 Delivery contents
Delivery contents The delivery contents of a temperature head transmitter are as follows:
• Head transmitter
• Installation screws, installation springs and circlips
• Operating instructions per order
• ATEX-operating instructions for use in hazardous areas
2
Hint!
Please take note of the head transmitter accessories in chapter 8 "Accessories"
3Installation
3.1 Installation conditions
Installation conditions • When installing and operating the unit please take note of the allowable ambient
temperature (see chapter 10 "Technical Data").
• When using the unit in a hazardous area, the limits indicated in the certification must
be adhered to (see additional ATEX manual).
Dimensions
The head transmitter dimensions can be found in chapter 10 "Technical Data".
Installation point
• Sensor connection head to DIN 43 729 Form B
• Field housing
Installation angle
There are no limits as to the angle on installation.
To Next Page
Loading...
