Endress+Hauser Levelflex M FMP40 - Page 14

Mounting Levelflex M FMP40 FOUNDATION Fieldbus
14 Endress+Hauser
Process connection, probe type
L00-FMP4xxxx-06-00-00-en-007
ø45 /ø75
88
88
400
123
2765
80
270...310
ø76
ø76
SW 50
SW 60
109
109
ø60
3 x ø8
ø67,8
150
20
25
27
20
15
25
100
ø76
ø81
M40x1
8
M40x1
Rope ø4mm: 98mm (
¾“)
: 137mm (1½“ or Flange)
Rope ø6mm: 152mm (1½
“ or Flange)
Threaded connection
G¾ (¾BSP)
or ¾NPT
Threaded connection
G1½ (1½BSP)
or 1½NPT
Flange DN40 to 200
or equivalent
reference point of
measurement
Variant “2”:
Separator
64.5
rope:
ø4 mm/
or
0.16”
ø6mm/0.24”
or
ø8mm/0.32”, coated PA
rope probe rod probe coax probe
ø6/0.24” (on ¾” thread)
ø16/0.63” (on 1½” thread
or flange)
ø21,3/0.84” (on ¾” thread)
ø42,4/1.67” (on 1½” thread
or flange)
ø22/0.87” (on 4 mm/ rope)0.16”
ø30/1.18” (on6mm/0.24”
rope)
internal thread:
M14 on 4 mm/0.16” rope
M20 on 6 mm/0.24” rope
probe
length LN
Probe rods in Alloy C22
consist of 1 piece
(can not be dismantled)
F12 / T12 / F23 housing
M5x0.8
M10x1.0
M10x1.0
4 x ø8.5
ø60.3
ø21.3
Type
ofProbe
(see feature 80 in “Ordering structure”)
Variant “3”:
remote electronic
Variant “4”:
remote electronic
with angled adaptor
ø45 Option 80, feature “B, D,F,H“
ø75 Option 80, feature “C, E, G,I“