Endress+Hauser Levelflex M FMP40 - Page 74

Commissioning Levelflex M FMP40 FOUNDATION Fieldbus
74 Endress+Hauser
Basic setup step 4/6:
• Enter the application parameters (see chapter basic setup with "VU331"):
– Probe length
– Probe
– Probe length
– Determine length
l00-fmp4xxxx-20-00-00-en-004
Basic setup step 5/6:
• Enter the application parameters (see chapter basic setup with "VU331"):
– Empty calibration
– Full calibration
l00-fmp4xxxx-20-00-00-en-005