Liquistation CSF34 Accessories
Endress+Hauser 189
14 Accessories
The following are the most important accessories available at the time this documentation
was issued.
Listed accessories are technically compatible with the product in the instructions.
1. Application-specific restrictions of the product combination are possible.
Ensure conformity of the measuring point to the application. This is the responsibility
of the operator of the measuring point.
2. Pay attention to the information in the instructions for all products, particularly the
technical data.
3. For accessories not listed here, please contact your Service or Sales Center.
14.1 Device-specific accessories
Order no. Bottle tray + bottles + cover
71162811 Bottle tray + 2 x 3.8 liter (1.00 US gal.) glass + cover
71111155 Bottle tray + 12 x 2 liter (0.53 US gal.) PE wedge-shaped bottle + cover
71111156 Bottle tray + 24 x 1 liter (0.26 US gal.) PE wedge-shaped bottle + cover
71111157 Bottle tray + 12 x 1 liter (0.26 US gal.) + 6 x 2 liter (0.53 US gal.) PE wedge-shaped
bottle + cover
Order no. Distributor plate; centering plate
71111163 Centering plate for bottle tray with wedge-shaped bottles
71186013 Centering plate for 4 x 5 liters Schott DURAN GLS 80 bottles
Order no. Bottles + covers
71162812 3.8 liter (1.00 US gal.) glass + cover, 1 pc
71111169 13 liter (3.43 US gal.) PE + cover, 1 pc
71111170 25 liter (5.28 US gal.) PE + cover, 1 pc
71111172 30 liter (7.92 US gal.) PE + cover, 1 pc
71111173 60 liter (15.8 US gal.) PE + cover, 1 pc
71111176 1 liter (0.26 US gal.) PE wedge-shaped bottle + cover, 24 pcs
71111178 2 liter (0.53 US gal.) PE wedge-shaped bottle + cover, 12 pcs
Order no. Complete suction line
71111233 Suction line ID 10 mm (3/8"), PVC, reinforced fabric, length 10 m (33 ft), suction head
V4A
71111234 Suction line ID 10 mm (3/8"), EPDM, length 10 m (33 ft), suction head V4A
71111235 Suction line ID 13 mm (1/2"), PVC, reinforced spiral wire, length 10 m (33 ft), suction
head V4A
71111236 Suction line ID 13 mm (1/2"), EPDM, length 10 m (33 ft), suction head V4A
71111237 Suction line ID 16 mm (5/8"), PVC, reinforced spiral wire, length 10 m (33 ft), suction
head V4A
71111238 Suction line ID 16 mm (5/8"), EPDM, length 10 m (33 ft), suction head V4A
To Next Page
Loading...
