Endress+Hauser Liquistation CSF34 - Sampling Program Types: Basic, Standard, Advanced

Liquistation CSF34 Operation
Endress+Hauser 77
10.3 Programming
The following box provides an overview of the differences between the Basic, Standard and
Advanced program types.
Basic (1 sampling program)
Start condition:
• Immediate
• Date/time
• Immediate activation
• Time-paced, volume-paced or
flow-paced (CTCV, VTCV, CTVV),
external signal,
• Bottle change after time or
number of samples, external
signal
• Bottle synchronization
• Multiple bottles
Stop condition:
• Program end
• Continuous operation
Standard (1 sampling program with 1-5 sub-programs)
Start condition:
• Immediate
• Date/time
• Volume
• Immediate activation, individual
times, multiple times, interval,
deactivation of sub-program 1
• Time-paced, volume-paced or
flow-paced (CTCV, VTCV, CTVV),
external signal
• Bottle change after time or
number of samples, external
signal
• Bottle synchronization
• Multiple bottles
Stop condition:
• Program end
• Continuous operation
• Date/time
Advanced (1 sampling program with 1-24 sub-programs)
Start condition:
• Immediate
• Date/time
• Volume
• External signal
• Fieldbus
• Immediate activation, individual
times, multiple times, interval,
event, external start,
deactivation of sub-program 1,
fieldbus
• Time-paced, volume-paced or
flow-paced (CTCV, VTCV, CTVV),
single sample, sample table,
external signal, fieldbus
• Bottle change after time or
number of samples, external
signal, fieldbus
• Sample synchronization
• Bottle synchronization
• Multiple bottles
Stop condition:
• Program end
• Continuous operation
• Date/time
• Fieldbus