Basic safety instructions Liquistation CSF34
8 Endress+Hauser
2.4 Operational safety
Before commissioning the entire measuring point:
1. Verify that all connections are correct.
2. Ensure that electrical cables and hose connections are undamaged.
3. Do not operate damaged products, and protect them against unintentional operation.
4. Label damaged products as defective.
During operation:
‣
If faults cannot be rectified:
products must be taken out of service and protected against unintentional operation.
L
CAUTION
Programs not switched off during maintenance activities.
Risk of injury due to medium or cleaning agent!
‣
Quit any programs that are active.
‣
Switch to the service mode.
‣
If testing the cleaning function while cleaning is in progress, wear protective clothing,
goggles and gloves or take other suitable measures to protect yourself.
To Next Page
Loading...
