Endress+Hauser Liquistation CSF34 - Device Information

Liquistation CSF34 Diagnostics and troubleshooting
Endress+Hauser 165
11.10 Device information
11.10.1 System information
DIAG/System information
Function Options Info
Device tag Read only Individual device tag → General
settings
Order code Read only You can order identical hardware
with this code.
This code changes on account of
changes to the hardware and you
can enter the new code you received
from the manufacturer here
1)
.

To establish the version of your device, enter the order code into the search screen at the following
address: www.endress.com/order-ident
Orig. order code ext. Read only Complete order code for the original
device, resulting from the product
structure.
Current order code ext. Read only Current code, taking into account
changes to the hardware. You must
enter this code yourself.
Serial number Read only The serial number allows you to
access device data and
documentation on the Internet:
www.endress.com/device-viewer
Software version Read only Current version
Sw version FMSY1 Read only Current version
FMSY1 proj. version Read only Current version
HART
Only with the HART option
Read only
• Bus address
• Unique address
• Manufacturer ID
• Device type
• Device revision
• Software revision
HART‐specific information
The unique address is linked to the
serial number and is used to access
devices in a Multidrop environment.
Device and software version
numbers are incremented as soon as
changes have been made.
Modbus
Only with the Modbus option
Read only
• Enable
• Bus address
• Termination
• Modbus TCP Port 502
Modbus‐specific information
PROFIBUS
Only with the PROFIBUS option
Read only
• Termination
• Bus address
• Ident number
• Baudrate
• DPV0 state
• DPV0 fault
• DPV0 master addr
• DPV0 WDT [ms]
Module status and other PROFIBUS-
specific information