Endress+Hauser Liquistation CSF34 - Connecting the Sampler Controller

Liquistation CSF34 Electrical connection
Endress+Hauser 27
Connecting the ferrules of the sensor cable to the base module E
‣
Ground the outer shield of the cable via the metal gland to the left of the base module
E.

32
31
A0028930
 20 Terminal strip
6.2 Connecting the sampler controller
The connections for the sampler controller are located in the controller housing (→  23).
6.2.1 Wiring the analog inputs and binary inputs/outputs
125
123
124
225
223
224
191
192
291
292
145
146
245
246
1
2
A0042282
 21 Position of the terminals
1 Analog inputs 1 and 2
2 Binary inputs/outputs