Liquistation CSF34 System integration
Endress+Hauser 53
PROFIBUS DP
With the Modbus modules 485DP or 485MB and the appropriate device version, you can
communicate via PROFIBUS DP.
‣
Connect the PROFIBUS data cable to the terminals of the fieldbus module as described .
For detailed information on "PROFIBUS communication", see the product pages on the
Internet (→ SD01188C).
Modbus
With the Modbus modules 485DP or 485MB and the appropriate device version, you can
communicate via Modbus RS485.
You use the BASE2 module for Modbus TCP.
The RTU and ASCII protocols are available when connecting via Modbus RS485. You can
switch to ASCII on the device.
‣
Connect the Modbus data cable to the terminals of the fieldbus module (RS 485) or to
the RJ45 socket of the BASE2 module (TCP) as described.
For detailed information on "Modbus communication", see the product pages on the
Internet (→ SD01189C).
EtherNet/IP
With the BASE2 module and the appropriate device version, you can communicate via
EtherNet/IP.
‣
Connect the EtherNet/IP data cable to the RJ45 socket of the BASE2 module.
For detailed information on "Ethernet/IP communication", see the product pages on
the Internet (→ SD01293C).
PROFINET
With the BASE2 module and the appropriate device version, you can communicate via
PROFINET.
‣
Connect the PROFINET data cable to the RJ45 socket of the BASE2 module.
For detailed information on "PROFINET communication", see the product pages on the
internet (→ SD02490C).
To Next Page
Loading...
