Endress+Hauser Micropilot FMR20 - Level Linearized

Micropilot FMR20 HART Operating menu
Endress+Hauser 83
Linearization type 
Navigation  Setup → Advanced setup → Lineariz. type
Description Linearization types
Meaning of the options:
• None:
The level is output in the level unit without being converted (linearized) beforehand.
• Table:
The relationship between the measured level L and the output value (volume/flow/
weight) is defined by a linearization table. This table consists of up to 32 value pairs, i.e.
"level - volume" or "level - flow" or "level - weight".
• Note:
Please use the DTM module to create/modify a linearization table.
Selection • None
• Table
Level linearized
Navigation  Setup → Advanced setup → Level linearized
Description Currently measured level
User interface Signed floating-point number