Endress+Hauser Micropilot FMR20 - Commissioning and operation; Installation and function check; Commissioning via SmartBlue (App)

Commissioning and operation Micropilot FMR20 HART
30 Endress+Hauser
9 Commissioning and operation
9.1 Installation and function check
Perform the post-installation check and the post-connection check prior to commissioning.
9.1.1 Post-installation check
 Is the device or cable undamaged (visual inspection)?
 Is the device adequately protected from wet conditions and direct sunlight?
 Is the device properly secured?
9.1.2 Post-connection check
 Is the device or cable undamaged (visual inspection)?
 Do the mounted cables have adequate strain relief?
 Are the cable glands mounted and firmly tightened?
 Does the supply voltage match the specifications on the nameplate?
 No reverse polarity, is terminal assignment correct?
9.2 Commissioning via SmartBlue (App)
9.2.1 Device requirements
Commissioning via SmartBlue is only possible if the device has Bluetooth capability
(Bluetooth module installed at the factory prior to delivery or retrofitted).
9.2.2 SmartBlue system requirements
SmartBlue system requirements
SmartBlue is available as a download from the Google Play Store for Android devices and
from the iTunes Store for iOS devices.
• Devices with iOS:
iPhone 4S or higher from iOS 9; iPad 2 or higher from iOS 9; iPod touch 5th generation
or higher from iOS 9
• Devices with Android:
From Android 4.4 KitKat and Bluetooth® 4.0
9.2.3 SmartBlue App
1. Scan the QR code or enter "SmartBlue" in the search field of the App Store.

A0039186
 27 Download link
2. Start SmartBlue.
3. Select device from livelist displayed.