Endress+Hauser Micropilot FMR20 - Performance characteristics

Accessories Micropilot FMR20 HART
58 Endress+Hauser
13.1.11 Adjustable flange seal
The adjustable flange seal is used to align the FMR20
The adjustable flange seal can be ordered together with the device via the product
structure "Accessory enclosed".
h
4°
øD
ød
h
max
h
min
±8°
A0045324
 48 Dimensions
Technical data: version DN/JIS
Order number 71074263 71074264 71074265
Compatible with DN80 PN10/40 DN100 PN10/16 • DN150 PN10/16
• JIS 10K 150A
Recommended screw length 100 mm (3.9 in) 100 mm (3.9 in) 110 mm (4.3 in)
Recommended screw size M14 M14 M18
Material EPDM
Process pressure –0.1 to 0.1 bar (–1.45 to 1.45 psi)
Process temperature –40 to +80 °C (–40 to +176 °F)
D 142 mm (5.59 in) 162 mm (6.38 in) 218 mm (8.58 in)
d 89 mm (3.5 in) 115 mm (4.53 in) 169 mm (6.65 in)
h 22 mm (0.87 in) 23.5 mm (0.93 in) 26.5 mm (1.04 in)
h
min
14 mm (0.55 in) 14 mm (0.55 in) 14 mm (0.55 in)
h
max
30 mm (1.18 in) 33 mm (1.3 in) 39 mm (1.45 in)
Technical data: version ASME/JIS
Order number 71249070 71249072 71249073
Compatible with • ASME 3" 150lbs
• JIS 80A 10K
ASME 4" 150lbs ASME 6" 150lbs
Recommended screw length 100 mm (3.9 in) 100 mm (3.9 in) 110 mm (4.3 in)
Recommended screw size M14 M14 M18
Material EPDM
Process pressure –0.1 to 0.1 bar (–1.45 to 1.45 psi)
Process temperature –40 to +80 °C (–40 to +176 °F)
D 133 mm (5.2 in) 171 mm (6.7 in) 219 mm (8.6 in)
d 89 mm (3.5 in) 115 mm (4.53 in) 168 mm (6.6 in)
h 22 mm (0.87 in) 23.5 mm (0.93 in) 26.5 mm (1.04 in)
h
min
14 mm (0.55 in) 14 mm (0.55 in) 14 mm (0.55 in)
h
max
30 mm (1.18 in) 33 mm (1.3 in) 39 mm (1.45 in)