Endress+Hauser Micropilot FMR20 - Delay Time Echo Lost; Diagnostics Echo Lost; Safety Settings

Operating menu Micropilot FMR20 HART
84 Endress+Hauser
"Safety settings" submenu
Navigation  Setup → Advanced setup → Safety sett.
Delay time echo lost 
Navigation  Setup → Advanced setup → Safety sett. → Delay echo lost
Description Define the delay time in the case of an echo loss.
After an echo loss, the device waits for the time specified in this parameter before reacting
as specified in the Diagnostic echo lost parameter. This helps to avoid
interruptions of the measurement by short-term interferences.
User entry 0 to 600 s
Diagnostics echo lost 
Navigation  Setup → Advanced setup → Safety sett. → Diagn. echo lost
Description At this parameter it can be set if in case of a lost echo a warning or an alarm is issued.
Selection • Warning
• Alarm