Endress+Hauser Micropilot FMR20 - Nameplate

Micropilot FMR20 HART Incoming acceptance and product identification
Endress+Hauser 13
4.4 Nameplate
12
11
8
7
6
2
1
3
4
5
19
20
15
16
13
17
14
Ext. ord. cd.:
Order code:
Ser. no.:
Tp max:
DeviceID:
Date:
ex works
Mat.:
FW:
Dev
.Rev.:
10
Ta:
if modification
see sep. label
X =
MWP:
23
21
22
9
18
25
24
A0029096
 2 Nameplate of Micropilot
1 Manufacturer address
2 Device name
3 Order code
4 Serial number (Ser. no.)
5 Extended order code (Ext. ord. cd.)
6 Supply voltage
7 Signal outputs
8 Process pressure
9 Permitted ambient temperature (T
a
)
10 Maximum process temperature
11 Device ID
12 Firmware version (FW)
13 Device revision (Dev.Rev.)
14 CE mark
15 Additional information about the device version (certificates, approvals)
16 RCM
17 Materials in contact with process
18 Logo
19 Degree of protection: e.g. IP, NEMA
20 Certificate symbol
21 Certificate- and approval-specific data
22 Document number of the Safety Instructions: e.g. XA, ZD, ZE
23 Modification mark
24 2-D matrix code (QR code)
25 Date of manufacture: year-month
Up to 33 characters of the extended order code are indicated on the nameplate. If the
extended order code contains additional characters, these cannot be displayed.
However, the complete extended order code can also be displayed via the device
operating menu: Extended order code 1 to 3 parameter