Operating menu Micropilot FMR20 HART
80 Endress+Hauser
15.3.1 "Advanced setup" submenu
Navigation Setup → Advanced setup
Access status tooling
Navigation Setup → Advanced setup → Access stat.tool
Description Shows the access authorization to the parameters via the operating tool.
Enter access code
Navigation Setup → Advanced setup → Ent. access code
Description The customer-specific access code, which has been defined in the Define access code
parameter, must be entered to change from the Operator to the Maintenance mode. The
device remains in the Operator mode if an incorrect access code is entered. If you lose the
access code, please contact your Endress+Hauser sales center.
User entry 0 to 9 999
Evaluation sensitivity
Navigation Setup → Advanced setup → Evaluation sens.
Description Selection of the evaluation sensitivity
Options to select from:
- Low
The weighting curve is high for low evaluation sensitivity. Interferers but also small level
signals are not recognized.
- Medium
The weighting curve is in a medium region.
- High
The weighting curve is low for high evaluation sensitivity. Interferers but also small level
signals can be reliably detected.
Selection • Low
• Medium
• High
To Next Page
Loading...
