Endress+Hauser Micropilot FMR20 - Technical data; Input; Output

Micropilot FMR20 HART Accessories
Endress+Hauser 57
13.1.10 FAU40 alignment unit
The alignment unit is used to optimally align the sensor with the bulk solids.
500 (19.7)
70 (2.76)
<360
(14.2)
NPT ¾
M20
10
(0.39)
NPT 1
G 1
19 (0.75)
101 (3.98)
125 (4.92)
ø155 (6.1)
ø155 (6.1)
27
(1.06)
30
(1.18)
21
(0.8)
13
4
A
B
15° 15°
A0045330
 47 Dimensions. Unit of measurement mm (in)
A Welding flange
B UNI flange
Material
• Flange: 304
• Pipe: steel, galvanized
• Cable gland: 304 or steel, galvanized
Order number
FAU40-##
Can be used for all rear sensor connections G1" or MNPT1, male thread, and
connecting cable max. Ø10 mm (0.43 in), minimum length 600 mm (23.6 in).
Technical Information TI00179F