Micropilot FMR50/FMR51/FMR52/FMR53/FMR54/FMR56/FMR57 FOUNDATION Fieldbus The "Expert" menu
Endress+Hauser 115
Write permission Maintenance
Prerequisite Only visible if Function input 1/2 level = Fixed value
Description Defines the level value in the event of a switch signal at external input 1 or 2.
User entry 0 to 200 000
Factory setting 0
Additional information The specific unit after linearization that has been selected applies.
Control measurement (1083)
Navigation Expert → Sensor → External input → Control measurement
Write permission Maintenance
Description Specifies the DO block via which measurement can be switched on and off.
Options • Manual
• Digital output 1
• Digital output 2
• Digital output 3
• Digital output 4
Factory setting Manual
Measurement (1082)
Navigation Expert → Sensor → External input → Measurement
Write permission Maintenance
Description Is used to switch measurement on and off manually.
Options • On
• Off
Factory setting On
To Next Page
Loading...
