Endress+Hauser Micropilot FMR56 - Expert → Diagnostics → Device Check

Micropilot FMR50/FMR51/FMR52/FMR53/FMR54/FMR56/FMR57 FOUNDATION Fieldbus The "Expert" menu
Endress+Hauser 141
Auswahl • Off
• On
Werkseinstellung Off (i.e. no simulation)
Switch status (0463)
Navigation Expert → Diagnostics → Simulation → Switch status
Prerequisite Only visible for Switch output simulation = On.
Description Use this parameter to define the switch status for the simulation.
Auswahl • Open
• Closed
Werkseinstellung Open
Simulation device alarm (0654)
Navigation Expert → Diagnostics → Simulation → Simulation device alarm
Description Use this function to switch the device alarm on and off. In this way, users can verify the
correct adjustment of the current output and the correct function of downstream switching
units.
The display alternates between the measured value and a diagnostics message of the
"function check" category (C) while simulation is in progress:
Options • On
• Off
Factory setting Off
3.9.7 Expert → Diagnostics → Device check
Start device check (1013)
Write access Maintenance
Navigation Expert → Diagnostics → Device check → Start device check
Description Start of a device check.