Endress+Hauser Micropilot FMR56 - Expert → System → Display

The "Expert" menu Micropilot FMR50/FMR51/FMR52/FMR53/FMR54/FMR56/FMR57 FOUNDATION Fieldbus
22 Endress+Hauser
3.1.1 Expert → System → Display
For operating tools: The Display submenu is only visible if a display module is
connected to the device.
Overview
The Display submenu is used to parametrize the representation of measured values on the
local display module. Up to four measured values can be allocated to the local display
module. Additionally, display characteristics such as the format of numbers, the associated
texts or the display contrast can be configured.
Parameter Meaning Description
Language Selection of the display language (→  23)
Format Display Selection of the display format (number and size of the displayed
measuring values)
(→  23)
Value 1 display Allocation of a measured variable to the first display value (→  25)
Decimal places 1 Number of decimal places for the first display value (→  25)
Value 2 display Allocation of a measured variable to the second display value (→  25)
Decimal places 2 Number of decimal places for the second display value (→  25)
Value 3 display Allocation of a measured variable to the third display value (→  25)
Decimal places 3 Number of decimal places for the third display value (→  25)
Value 4 display Allocation of a measured variable to the fourth display value (→  25)
Decimal places 4 Number of decimal places for the fourth display value (→  25)
Display interval Time the individual variables are displayed in the case of an alternating
display
(→  26)
Display damping Time constant for the damping of displayed values (→  26)
Header Selection of the header text:
• Device tag
• Free text
(→  26)
Header text Definition of the header text in the case of Header = Free text (→  27)
Separator Selection of the decimal separator (point of comma) (→  27)
Number format Selection of the number format for distance values (decimal or ft-in-1/16") (→  28)
Decimal places menu Number of decimals for values in the operating menu (not the measuring
values)
(→  28)
Contrast display Contrast of the LCD (20 ... 80%) (→  28)
Backlight Switch-on/switch-off of the display module SD03 (→  29)
Access status display Displays the user role for operation via the display module (→  18)