Endress+Hauser Micropilot FMR56 - Page 25

Micropilot FMR50/FMR51/FMR52/FMR53/FMR54/FMR56/FMR57 FOUNDATION Fieldbus The "Expert" menu
Endress+Hauser 25
Value 1 display (0107)
Value 2 display (0108)
Value 3 display (0110)
Value 4 display (0109)
Navigation Expert → System → Display → Value 1/2/3/4 display
Write access Maintenance
Description Select the measured value that is shown on the local display.
Options • None
1)
• Level linearized
• Distance
• Terminal voltage
• Electronics temperature
• Absolute echo amplitude
• Relative echo amplitude
• Analog output adv. diagnostics 1
• Analog output adv. diagnostics 2
1) Can not be selected for "Value 1 display".
Factory setting • Value 1 display: Level linearized
• Value 2 display: None
• Value 3 display: None
• Value 4 display: None
Additional information The Format display parameter is used to specify how many measured values are displayed
simultaneously and how (→  23).
Decimal places 1 (0095)
Decimal places 2 (0117)
Decimal places 3 (0118)
Decimal places 4 (0119)
Navigation Expert → System → Display → Decimal places 1/2/3/4
Write access Maintenance
Prerequisite A measured value is specified in the Value 1/2/3/4 display parameter (→  25).
Description Select the number of decimal places for the display value.
Options • x
• x.x
• x.xx
• x.xxx
• x.xxxx
Factory setting x.xx