Endress+Hauser Micropilot FMR56 - Page 26

The "Expert" menu Micropilot FMR50/FMR51/FMR52/FMR53/FMR54/FMR56/FMR57 FOUNDATION Fieldbus
26 Endress+Hauser
Additional information This setting does not affect the measuring or computational accuracy of the device.
Display interval (0096)
Navigation Expert → System → Display → Display interval
Write access Operator
Description Set time measured values are shown on display if display alternates between values.
Input range 1 to 10 s
Facotry setting 5 s
Additional information An alternating display only occurs automatically if the number of measured values defined
exceeds the number of values the selected display format can display simultaneously.
• The Value 1 display - Value 4 display parameters are used to specify what
measured values are shown on the display (→  25).
• The display format of the displayed measured values is specified using the
Format display parameter (→  23).
Display damping (0094)
Navigation Expert → System → Display → Display damping
Write access Maintenance
Description Set display reaction time to fluctuations in the measured value.
Input range 0 to 999 s
Factory setting 0 s
Header (0097)
Navigation Expert → System → Display → Header
Write access Maintenance
Description Select header contents on local display
Options • Device tag
• Free text
Factory setting Device tag