Endress+Hauser Micropilot FMR56 - Expert → Sensor; Overview

Micropilot FMR50/FMR51/FMR52/FMR53/FMR54/FMR56/FMR57 FOUNDATION Fieldbus The "Expert" menu
Endress+Hauser 37
3.2 Expert → Sensor
3.2.1 Overview
The Sensor submenu contains all parameters related to the measurement and the sensor
settings.
Parameters
Parameter Meaning Description
Distance unit Measuring unit for basic distances (e.g empty and full calibration) (→  38)
Temperature unit Measuring unit for temperatures (e.g. sensor temperature,
electronics temperature)
(→  38)
Tank type Selection of the tank type (for liquid measurements) (→  38)
Tube diameter Specification of the bypass or stilling well diameter (for liquid
measurements)
(→  39)
Bin property Selection of the bin type (for solid measurements) (→  39)
Max. filling speed liquid Specification of the maximum filling speed (for liquid
measurements)
(→  40)
Max. draining speed liquid Specification of the maximum draining speed (for liquid
measurements)
(→  40)
Max. filling speed solid Specification of the maximum filling speed (for solid
measurements)
(→  40)
Max. draining speed solid Specification of the maximum draining speed (for solid
measurements)
(→  41)
Advanced process
conditions
Specification of additional process conditions (if required) (→  41)
Application parameter Indicates whether settings depending on the application
parameters have been changed after the definition of the
application parameters.
(→  42)
Submenus
Submenu Meaning Description
Medium Properties of the medium (→  43)
Level Parametrization of a level measurement (→  45)
Linearization Transformation of the measured level into a volume or weight for
arbitrarily shaped vessels
(→  55)
Information Informs about the current state of the measurement (→  64)
Sensor properties Definition of measurement related properties of the probe (→  69)
Distance Filtering of the raw distance (→  71)
Gas phase
compensation
Compensation of the influences of a gas or steam above the measured
medium.
(→  79)
Sensor diagnostics Informs about the state of the probe and the HF cable. (→  86)
Safety settings Defines the behavior of the device in critical situations (e.g. lost echo,
level in safety distance).
(→  87)
Envelope curve Preprocessing of the envelope curve (→  95)
Mapping Suppression of interference echos (→  97)
Tank bottom
evaluation
Evaluation of echoes in the proximity of the tank bottom (→  107)
Echo tracking Tracking of level, interface, multiple and interference echos in order to
identify the correct echo unambiguously.
(→  109)