Endress+Hauser Micropilot FMR56 - Page 138

The "Expert" menu Micropilot FMR50/FMR51/FMR52/FMR53/FMR54/FMR56/FMR57 FOUNDATION Fieldbus
138 Endress+Hauser
Navigation Expert → Diagnostics → Min/max values → Max. draining speed
Description Use this parameter to view the maximum draining speed measured until now (drag
indicator).
Max. filling speed (2360)
Write access Read-only parameter
Navigation Expert → Diagnostics → Min/max values → Max. filling speed
Description Use this parameter to view the maximum filling speed measured until now (drag
indicator).
Reset min./max. (2324)
Write access Service
Navigation Expert → Diagnostics → Min/max values → Reset min./max.
Description Resets the drag indicator of the selected process variable.
Access to this parameter is reserved to the Endress+Hauser service staff. It can only be
accessed after entering the service code.
Max. electronics temperature (1031)
Write access Read-only parameter
Navigation Expert → Diagnostics → Min/max values → Max. electronics temperature
Description Use this parameter to view the maximum electronics temperature measured until now
(drag indicator).
Time max. electronics temperature (1204)
Write access Read-only parameter
Navigation Expert → Diagnostics → Min/max values → Time max. electronics temperature
Description Use this parameter to view the operating time at which the maximum electronics
temperature has been measured.