EasyManua.ls Logo

Endress+Hauser Micropilot FMR56 - Page 154

Endress+Hauser Micropilot FMR56
160 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
The "Expert" menu Micropilot FMR50/FMR51/FMR52/FMR53/FMR54/FMR56/FMR57 FOUNDATION Fieldbus
154 Endress+Hauser
Navigation Expert → Diagnostics → Advanced diagnostics → Assign status signal to AD event
1/2
Write access Maintenance
Prerequisite Only visible if a measuring variable has been assigned to the Advanced Diagnostics Block
via the Assign diagnostic signal 1/2 parameter.
Description Assigns an event category according to NAMUR NE107 to the event of the Advanced
Diagnostics Block.
Options Failure (F)
Maintenance required (M)
Function check (C)
Out of specification (S)
Factory setting Maintenance required (M)
Assign event behaviour 1/2 (11177)
Navigation Expert → Diagnostics → Advanced diagnostics → Assign event behaviour 1/2
Write access Maintenance
Prerequisite Only visible if a measuring variable has been assigned to the Advanced Diagnostics Block
via the Assign diagnostic signal 1/2 parameter.
Description Assigns an event behavior to the event of the Advanced Diagnostics Block.
Options Off
Alarm
Warning
Logbook entry only
Factory setting Warning
Alarm delay 1/2 (11171)
Navigation Expert → Diagnostics → Advanced diagnostics → Alarm delay 1/2
Write access Maintenance
Prerequisite Only visible if a measuring variable has been assigned to the Advanced Diagnostics Block
via the Assign diagnostic signal 1/2 parameter.
Description Assigns an event behavior to the event of the Advanced Diagnostics Block.
Input range 0 to 3 600 s

Table of Contents

Other manuals for Endress+Hauser Micropilot FMR56

Related product manuals