Endress+Hauser Micropilot FMR56 - Installation in Vessel (Free Space)

Micropilot FMR56, FMR57 FOUNDATION Fieldbus Installation
Endress+Hauser 23
100%
0%
A
B
C
A0016916
Device A [mm (in)] C [mm (in)]
FMR56
400(15.7) 50 to 150(1.97 to 5.91)
FMR57
6.3 Installation in vessel (free space)
6.3.1 Horn antenna with slip-on flange (FMR56)
Alignment
When using the Micropilot with a slip-on flange in explosion-hazardous areas, strictly
observe all specifications in the relevant Safety Instructions (XA).
• Align the antenna vertically to the product surface.
Optionally, a variable flange seal, which is available as an accessory, can be used for
alignment (see Technical Information BA01048F, chapter "Accessories").
• A marking at the boss enables alignment of the antenna. This marking must be aligned
towards the tank wall as well as possible.