Endress+Hauser Micropilot FMR56 - Configuration of a Level Measurement

Micropilot FMR56, FMR57 FOUNDATION Fieldbus Commissioning (block-based operation)
Endress+Hauser 63
11.4 Configuration of a level measurement
The Setup method can also be used to configure the measurement. It is called up via the
SETUP (TRDSUP) Transducer Block.
100%
0%
R
BD
D
L
F
E
A0016934
R = Reference point of the measurement E = Empty calibration (= Zero point)
D = Distance F = Full calibration (= span)
L = Level