Endress+Hauser Micropilot FMR56 - 1 Wichtige Hinweise zum Dokument; Symbols

Wichtige Hinweise zum Dokument Micropilot FMR56, FMR57 FOUNDATION Fieldbus
4 Endress+Hauser
11.2 Scaling of the measured value in an AI Block ................................................. 60
11.3 Language selection .................................................................... 62
11.4 Configuration of a level measurement ...................................................... 63
11.5 Configuration of the on-site display ........................................................ 65
11.6 Configuration management .............................................................. 65
1 Wichtige Hinweise zum Dokument
1.1 Symbols
1.1.1 Safety symbols
Symbol Meaning
DANGER
DANGER!
This symbol alerts you to a dangerous situation. Failure to avoid this situation will result in
serious or fatal injury.
WARNING
WARNING!
This symbol alerts you to a dangerous situation. Failure to avoid this situation can result in
serious or fatal injury.
CAUTION
CAUTION!
This symbol alerts you to a dangerous situation. Failure to avoid this situation can result in
minor or medium injury.
NOTICE
NOTE!
This symbol contains information on procedures and other facts which do not result in
personal injury.
1.1.2 Electrical symbols
Symbol Meaning Symbol Meaning
Direct current Alternating current
Direct current and alternating current Ground connection
A grounded terminal which, as far as
the operator is concerned, is grounded
via a grounding system.
Symbol Meaning
Protective Earth (PE)
A terminal which must be connected to ground prior to establishing any other connections.
The ground terminals are situated inside and outside the device:
• Inner ground terminal: Connects the protectiv earth to the mains supply.
• Outer ground terminal: Connects the device to the plant grounding system.