Endress+Hauser Profi Bus Levelflex M FMP40 - Function Fixed Cur. Value (064), HART Only; Function Out Status (064), PROFIBUS PA Only

8 Function group "output" (06), - "PROFIBUS param." (06), PROFIBUS PA only Levelflex M
52 Endress+Hauser
8.9 Function "fixed cur. value" (064), HART only
Set the fixed current value with this function. This data is necessary if you have selected the "fixed
current" option in the "curr. output mode" (063) function.
User input:
3,8...20,5 mA
"
Caution!
This user input is available for HART devices only!
8.10 Function "out status" (064), PROFIBUS PA only
Displays the current output status (for value, see operating instructions of relevant instrument).
"
Caution!
This function is available for PROFIBUS PA devices only!
⇒
ENDRESS + HAUSER
E
+
–
⇒
ENDRESS + HAUSER
E
+
–