Endress+Hauser Profi Bus Levelflex M FMP40 - Function Application Par. (0 A8)

11 Function group "diagnostics" (0A) Levelflex M
68 Endress+Hauser
11.9 Function "application par." (0A8)
Displays whether or not one of the settings dependent on the "tank shape" (002),
"medium property" (003) and "process cond." (004) application parameters has been changed
or not.
If, for example, the "output damping" (058) is changed, the
"application par."shows"modified".
Selection:
• not modified
• modified
⇒
ENDRESS + HAUSER
E
+
–
⇒
⇓
After 3 s, the following message appears
ENDRESS + HAUSER
E
+
–