Proline Promag H 300
52 Endress+Hauser
DN A B C D E F G H K L
90°
±0.5°
60°
±0.5°
[mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] Tapped holes
100 166.7 159.5 141.0 114.3 97.4 M8 12 17 – 6
125 198.7 191.5 171.0 139.7 120.0 M10 15 20 – 6
150 226.7 219.5 200.0 168.3 146.9 M10 15 20 – 6
Flanges
Flanges with aseptic molded seal
A0015627
37 Detail X: Asymmetrical process connection; the part shown in gray is provided by the supplier.
Flange DIN 11864-2 Form A, for pipe according to DIN 11866 series A, flat flange
1.4404 (316L)
Order code for "Process connection", option DES
DN
[mm]
Suitable for pipe EN 10357 (DIN 11850)
[mm]
A
[mm]
B
[mm]
C
[mm]
D
[mm]
E
[mm]
L
[mm]
2 to 8 13 × 1.5 (DN 10) 54 37 4 × ⌀9 10 10 183
15 19 × 1.5 (DN 15) 59 42 4 × ⌀9 10 16 183
25 29 × 1.5 (DN 25) 70 53 4 × ⌀9 10 26 183
40 42 × 1.5 82 65 4 × ⌀9 10 65 246
50 54 × 1.5 94 77 4 × ⌀9 10 77 246
65 70 × 2 113 95 4 × ⌀9 10 95 246
80 85 × 2 133 112 4 × ⌀9 10 112 270
100 104 × 2 159 137 4 × ⌀9 10 137 278
125 129 × 2 190 161 4 × ⌀9 10 161 362
150 154 × 2 220 188 4 × ⌀9 10 188 362
Surface roughness: R
a
≤ 0.8 µm, optional ≤ 0.38 µm
Please note the internal diameters of the measuring tube and process connection (E) when cleaning with pigs.
To Next Page
Loading...
