Endress+Hauser Proline Promass 80 - HART connection; Connection of a PC with an operating software

9 Group CURRENT OUTPUT 1/2 Device Functions Proline Promass 80
28 Endress+Hauser
VALUE SIMULATION
CURRENT
! Note!
This function is not available unless the SIMULATION CURRENT function is active
(= ON).
Use this function to define a selectable value (e.g. 12 mA) to be output at the current
output. This value is used to test downstream devices and the measuring device itself.
User input:
floating-point number: 0.00...25.00 mA
Factory setting:
0.00 mA
" Caution!
The setting is not saved if the power supply fails.
Function description CURRENT OUTPUT 1/2